Fall protection
that holds up
to inspection.
We test, certify and install height safety systems for facilities managers across the UK. Twenty years in the field, full documentation on every job, and the certifications your auditor actually wants to see.
Three things that get
facilities managers
prosecuted under the
Work at Height Regulations 2005.
The HSE doesn't care that the system was installed correctly fifteen years ago. They care whether it has been tested in the last twelve months, whether the certification is current, and whether it meets the standards in force today.
Equipment that hasn't been tested in 12 months (or 6 months for some systems)
Fall arrest systems, mansafes, eyebolts and guardrails require inspection by a competent person at least every twelve months — and every six months for certain systems. Anything beyond its test interval is non-compliant by default, regardless of how it looks.
Missing or out-of-date certification
If you can't produce current test certificates on request, your system is assumed non-compliant. Most prosecutions hinge on the documentation, not the equipment itself.
Systems that don't meet current British Standards
BS EN 795 for anchor devices, BS 7883:2019 for installation, BS 8437 for selection and use. Systems installed to older standards still need to meet today’s requirements to remain compliant.
Two routes in. One standard of work.
Most engagements start with an inspection. We identify what's compliant, what isn't, and what needs work. Where remediation or new systems are required, we install to the same standard we test to. Same team. Same documentation. End to end.
Inspection & Certification
Annual testing and recertification for every category of height safety equipment. Each inspection produces a documented report with photographs, defect notes, and a clear pass/fail against current standards.
Installation & Remediation
Where inspection identifies non-compliant or absent systems, we install. Fall protection, fall arrest, roof access, walkways and skylight protection. Installed to current standards, certified on completion, with full documentation handover.
From compliance check to certified handover.
Every engagement runs the same way. No surprises, no scope creep, no missing paperwork at the end.
Free desk review of your existing systems
Send us what you have: previous test reports, photos, drawings, equipment lists. We tell you what's covered, what's gapped, and what the priority is.
Engineer attends site for a full survey
Every system inspected against current British Standards. Defects photographed and logged. Verbal summary on the day, written report within 48 hours.
Documented findings with a clear quotation
You receive a pass/fail report for each system, photographic evidence of any defects, and a fixed-price quotation for any remediation or new installation required.
Remediation and new system installation
Where required, we install. To current standards, by our own engineers, with the same documentation discipline as inspection work. No subcontracted gaps in the chain.
Full documentation handover
Test certificates, installation certificates, photographs, drawings, and a recertification reminder set to your system's interval — 12 monthly or 6 monthly. The complete audit pack your H&S file requires.
Find out where you stand. In ten minutes. At no cost.
Answer twelve questions about your building, your existing systems, and your last test dates. We send back a written compliance status report with the gaps prioritised by risk and a clear next step for each.
- No site visit required to start
- Written report within two working days
- Risk-prioritised gap analysis
- No obligation to proceed with any work
Work that speaks for itself.
A sample of the buildings we look after across the UK on live, ongoing contracts. Full client list available on request.
John Lewis Head Office
Atrium guardrail installation, gantry modifications, BS EN 1004-1 hop-up platform and BS EN 60204-1 electrical lockout to support safe maintenance access to the smoke and ventilation systems.
View project →
Transport for London
Manual travelling access gantry overhaul: upgraded taper lock bearings and drive gears, replacement outrigger boards for safe close access to glass atria, and ongoing operator training.
View project →
Worcester University
18-site inspection and testing programme across the estate, with a fully updated asset register, fixed ladder stringer installations and remedial anchor point works across multiple buildings.
View project →
AO Recycling
Site-wide installation: 90 anchor points across roof and skylight areas, two fixed access ladders to lower roofs, guardrails around access hatches, and remediation of existing guardrail to the 1100mm standard.
View project →What you actually get when you appoint us.
Two decades working exclusively in fall protection and roof access. This is not a general contractor diversifying into safety work.
Completed across commercial, public sector, leisure, higher education and industrial buildings throughout the UK.
Annual recertifications, condition surveys and incident inspections logged with full photographic and written documentation.
Written reports issued within two working days of site visit. No chasing, no delays, no "the engineer's still typing it up".
Inspection and installation under one roof
Same engineers, same documentation standards, same accountability. No "you'll need to get another contractor in for the remediation" handovers.
Audit-ready documentation as standard
Test certificates, installation records, photographic evidence, and current-standard references on every job. Filed digitally and physically.
ISO 9001, 14001 and 45001 certified
Quality, environmental and occupational health and safety management systems independently audited. Safe Contractor approved.
Two regional bases. UK-wide coverage
Headquartered in Dorset, with a London office at 66 Paul Street. Engineers deployed nationwide. Site visits typically scheduled within five working days.
Working at height. Wherever the building is.
Two offices, one nationwide operation. Our engineers cover the whole of mainland UK and Northern Ireland. Most site visits scheduled within five working days of enquiry.
London
Shaftesbury
Tell us about your building.
We'll tell you where you stand.
For installation enquiries, inspection bookings, or compliance questions: send us a brief description of the site and the systems you have, or send your last test report. We respond within one working day, often the same day.
Thanks. We've received your enquiry and will respond shortly.
We'll be in touch within one working day, often the same day. If your request is time-critical, call us on 0204 572 5223.