Abseiling anchors are critical to safe rope access, but without regular testing and inspection, their reliability cannot be guaranteed.
Our certified abseiling anchors testing and inspection is carried out by experienced professionals to ensure your anchor points are safe, compliant, and ready for use.
Ensure your abseiling anchors are safe and compliant
Abseiling anchors are a critical part of any rope access system, used for façade maintenance, inspection, and cleaning at height.
Without regular testing, their integrity can’t be guaranteed. Many buildings also have existing anchors with little or no documentation.
We provide professional abseiling anchors testing and inspection to confirm they are secure, correctly installed, and compliant. Where records are missing, we can assess existing systems and provide the documentation needed to bring your anchors back into a compliant condition.
How often do abseiling anchors need to be tested & inspected?
Testing frequency depends on how your anchors are used and the level of risk involved. Under the Work at Height Regulations 2005 and PUWER 1998, all work equipment, including anchor points, must be inspected by a competent person at suitable intervals
Anchor testing frequency
| Anchor type | Inspection frequency | When it applies |
|---|---|---|
| Rope access / abseiling anchors | Every 6 months | Frequent use and higher load demands |
| Fall arrest anchors | Every 12 months | Standard fall protection systems |
| After load event or damage | Immediate inspection required | Any fall, shock load or visible defect |
More frequent inspections may be required depending on usage, environment, or manufacturer guidance.
If an anchor has been subjected to a load event or shows signs of damage, it must be removed from service and inspected before it can be used again.
What our abseiling anchor testing service covers
Abseiling anchors are fixed points used to support rope access systems for façade maintenance, inspection and work at height.
Our abseiling anchor testing and inspection service covers all types of anchor points, regardless of manufacturer or installer. So whether your anchors are newly installed, part of an existing system, or inherited with limited documentation, we can inspect and certify them.
Every inspection follows a structured process aligned with current standards, ensuring your anchors are fully assessed for structural integrity, mechanical performance, and safe use.
The types of anchors we test
We carry out abseiling equipment testing and inspection across a range of anchor types:
| Anchor type | Typical use |
|---|---|
| Abseil anchors | Façade access and maintenance |
| Eyebolts | Rope access and fall protection |
| Rope access anchor systems | Multi-point anchor setups |
| Fixed anchor points | General work at height safety |
What you receive after testing
Following inspection, you’ll receive clear, audit-ready documentation confirming the condition and compliance of your anchors.
- Anchor inspection certificate
- Written inspection report
- Tagged anchors with inspection status
- Photographic evidence where required
- Clear recommendations for any remedial work
The reports provided are suitable for HSE inspections, insurance requirements and compliance records.
Supporting safe access across a range of buildings
We support duty holders responsible for safe access systems across:
- Commercial buildings and offices
- High-rise and façade access systems
- Facilities management portfolios
- Industrial and maintenance environments
Frequently Asked Questions
How often do abseiling anchors need testing?
Abseiling anchors used for rope access are typically tested every 6 months, while fall arrest anchors require annual testing. Frequency may vary depending on usage, environment, and manufacturer guidance.
Is abseiling anchor testing a legal requirement?
Yes. Under the Work at Height Regulations and PUWER, anchor points must be inspected by a competent person and maintained in a safe condition.
What is proof load testing?
Proof load testing involves applying a controlled force to an anchor to confirm it meets required strength and safety standards.
What happens if an anchor fails inspection?
It must be taken out of service immediately until repairs or replacement are completed and the anchor passes reinspection.
Make sure your anchors are safe to use
Abseiling anchors are critical to safe working at height. Regular inspection ensures they remain secure, compliant, and fit for purpose.
Book your anchor inspection or request a free consultation today.